Skip to Main Content

1L Library Orientation

 

The library has:

  • 3 printers on the 2nd floor in room 203D
  • 1 printer on the 1st floor in room 103D
  • 1 color printer near the student offices outside The Commons

Cost is $.05 per page for black & white, $.10 per page for color. You will start each semester with a $50.00 print credit.

If paper or toner needs to be replaced, or there is an error or paper jam, please inform the student worker at the circulation desk.

To print from a personal laptop, you will need to install the Pharos software. Please contact the IT department on the 4th floor.

Log In and Print

When sending a document to the printer, enter your Campbell username (email address up to the @ sign, e.g., jasmith0101).

print login screen

 

At the printer, swipe your ID card through the reader on the side of the machine (mag stripe down and to the left). Once the Welcome box pops up, press OK, then press Pharos Print. Next you will see a list of your print job(s) and you can select them for printing.

Scanning

The printers also function as scanners. Scans are delivered via email as PDF files or can be saved to a USB drive. Note that some PDF files are quite large and may exceed the capacity of the law school's email provider. There is no charge for scanning.

  • Swipe your ID
  • Press Scan on the touchscreen
  • Press Me (your email address will appear in the top right)
  • To scan multiple pages as one document, press Separate Scan on the bottom right
  • When scanning is done, press Finish and then the Start button

 

Stapling and Hole-Punching

To staple and/or hole-punch documents that you PRINT, follow these steps.

  1. Go to Printer Properties
  2. Select the Finish tab
  3. Tick the corresponding box, then choose the location for Staple and/or Punch

Select OK, then Print

To staple and/or hole-punch documents that you COPY, follow these instructions BEFORE swiping your ID:

  1. Press the Menu button
  2. Select Utility
  3. Select User Settings
  4. Select Printer Settings
  5. Select Paper Settings
  6. Use the arrow button to page down
  7. Select Staple or Punch
  8. Choose your desired setting
  9. Press OK
  10. Press Close 3 times then swipe your ID

REPEAT THESE STEPS TO TURN OFF